Home Up Corrugated Metal Doors Hollow Metal Doors Wall Panel Shelving Panel Custom Rollforming Lines Window spacers & bars Highway Rail Guard Tube Mill Square Channels Automation Special Purpose Machinery Reservoir & Silos Material handling Roll Tooling Used Equpment

Corrugated Roll Forming Lines

at a speed of up to 70 meters/min

 

Trapezoid

Our corrugated panel lines are offered in 2 type running modes: Stop and Go or Continuous Run

  • ·        Line Speed up to 70 meters per min

  • ·        Material thickness 0.45mm to 1.25mm zinc coated or pre-paint

  • ·        Part cut length 2m to 12 m

  Line configuration and options:

  1. 10 ton Uncoiler - Optional with coil car

  2. Entry Feed up Scissor table

  3. Rear cutter

  4. Entry Lubrication Unit

  5. Entry Guide

  6. Roll forming machine (Single or Double Decker)

  • ·        Roll tooling space – 1110mm to 1550 mm

  • ·     Quantity Roll forming Stations - from 12 to 28

  • ·      Standard shaft Diameter – 90mm, 100mm or 110mm

  • ·        Bonfiglioli gear reducers and chain transfer

  • ·        Structural I beam or tubular base

  1. High speed Flying Cut-Off shear (Continuous run)

  2. Stationary Cut-Off shear (Stop and Go)

  3. Material handling system

  • ·        High speed drop stacker with  inline run out roller conveyor

             or

  • ·        Standard Drop Off stacker with inline or side discharge conveyor (roller or chain conveyor)

 

 

 

Sinusoid

Roof Tail